H3C S10500X Series Next Generation Multiservice Core Switch

                    HomeProducts & TechnologyEnterprise ProductsSwitchesH3C S10500X Series Next Generation Multiservice Core Switch
                    H3C S10500X Series Switch

                    H3C S10500X series switch is designed for the core layer of data centers and next-generation campus networks as well as the distribution layer of MANs. It provides the following features:

                    * Advanced CLOS multistage and multi-plane switching architecture, delivering great bandwidth scalability.

                    * A wide range of data center features, including TRansparent Interconnection of Lots of Links (TRILL), Ethernet Virtual Interconnect (EVI), Multitenant Device Context (MDC), Edge Virtual Bridging (EVB), and Fibre Channel over Ethernet (FCoE).

                    * Fully compliant with 40GE and 100GE Ethernet standards.

                    * H3C's state-of-the-art Comware V7 operating system.

                    * Virtualization software system based on the Intelligent Resilient Framework 2 (IRF2).

                    * Comprehensive network services, including MPLS VPN, IPv6, application security, application optimization, and BRAS services.

                    * A variety of HA features, such as Non-Stop Forwarding (NSF), In-Service Software Upgrade (ISSU), Graceful Restart (GR), and ring protection. These features improve operation efficiency, maximize service time, and reduce TCO.

                    * Compliant with RoHS and environment-friendly.

                    The S10500X series switch includes the S10506X, S10508X and S10510X models, with port density and performance to fit different deployment scales. It is your best choice to build a robust core network.

                    Advanced system architecture

                    The system architecture incorporates the following advanced designs:

                    Clos multistage and multi-plane switching architecture—delivers great bandwidth scalability.

                    Orthogonal interconnection of switching fabric modules and service modules—Traffic between service modules is sent directly to the switching fabric modules through the orthogonal interconnectors, without cabling on the backplane, which significantly reduces signal loss and improves bandwidth efficiency. This design offers great bandwidth and capacity scalability, allowing the system capacity to be expanded to 100 Tbps.

                    Compliant with 40GE and 100GE Ethernet standards—Enables the system to satisfy the growing demands of non-blocking campus networks.

                    Switching fabric module independency and redundancy—Independence between switching fabric modules and control engines maximizes the system availability and ensures bandwidth expansion.

                    Fan tray and power module redundancy—Guards the switch against unexpected fan tray and power module failures and significantly enhances system availability.

                    Distributed multi-engines

                    The switch innovatively uses distributed control engines, detection engines, and maintenance engines to deliver powerful control capability and millisecond-level HA.

                    Distributed control engines—Each service module is integrated with a strong control and processing system. It can efficiently process varieties of protocol packets and control packets, and provide refined control for protocol packets to safeguard against protocol packet attacks.

                    Distributed detection engines—Each service module can use BFD and OAM to detect faults in milliseconds and interact with control plane protocols for fast failover and convergence to ensure service continuity.

                    Distributed maintenance engines—The intelligent CPU system supports intelligent power management and online status monitoring of key components. It can power on and off modules in sequence, which reduces power impulse, electromagnetic radiation, and power consumption, and prolongs the device lifespan.

                    H3C Intelligent Resilient Framework 2 (IRF 2) technology

                    H3C Intelligent Resilient Framework 2 (IRF 2) virtualizes multiple S10500X switches into one logical switch called an IRF fabric. IRF improves system performance and delivers the following benefits:

                    High availability—The H3C proprietary routing hot backup technology ensures redundancy and backup of all information on the control and data planes and non-stop Layer 3 data forwarding in an IRF 2 fabric. It also eliminates single point of failure and ensures service continuity.

                    Redundancy and load balancing—The distributed link aggregation technology supports load sharing and mutual backup among multiple uplinks, which enhances the network redundancy and improves link resources usage.

                    Simplified topology and easy management—An IRF fabric appears as one node and is accessible at a single IP address on the network. This simplifies network device and topology managements, improves operating efficiency, and reduces maintenance cost.

                    Abundant data center solutions

                    The switch offers a wide range of solutions for data center virtualization and network convergence, including:

                    TRansparent Interconnection of Lots of Links (TRILL)—Combine the simplicity and flexibility of Layer 2 switching with the stability, scalability, and rapid convergence capability of Layer 3 routing, to provide highest port density and flat network topology for addressing massive server accesses at data centers.

                    Virtual eXtensible LAN (VXLAN)—A MAC-in-UDP technology that provides Layer 2 connectivity between distant network sites across an IP network. It also enables service isolation between different tenants.

                    Edge Virtual Bridging (EVB)—Uses the Virtual Ethernet Port Aggregator (VEPA) mode to switch traffic of VMs to a physical switch connected to the server for processing. This not only ensures traffic forwarding between VMs, but also enables VM traffic policing and access control policy deployment.

                    Fibre Channel over Ethernet (FCoE)—Integrates heterogeneous LANs and storage networks in data centers. In conjunction with Converged Enhanced Ethernet (CEE), FCoE combines the frontend network with the backend networking architecture, and integrates data, computing, and storage networks in data centers, to significantly reduce the costs for building and expanding data centers.

                    MP-BGP EVPN (Multiprotocol Border Gateway Protocol Ethernet Virtual Private Network) uses standard-based BGP protocol as the control plane for VXLAN overlay networks, providing BGP based VTEP auto peer discovery and end-host reachability information distribution. MP-BGP EVPN delivers many benefits, such as eliminating traffic flooding, reducing full mesh requirements between VTEPs via the introduction of BGP RR, achieving optimal flow based end to end load sharing and more.

                    DRNI-based HA

                    Distributed Resilient Network Interconnect (DRNI) virtualizes two physical devices into one system through multi chassis link aggregation. It provides device-level redundancy and load sharing and enhances the system availability.

                    All-round IPv6 solutions

                    The switch offers comprehensive IPv6 features, including:

                    IPv6 routing—IPv6 static routing, RIPng, OSPFv3, IS-ISv6, and BGP4+.

                    IPv4-to-IPv6 transition—IPv6 manual tunnel, 6to4 tunnel, ISATAP tunnel, GRE tunnel, and IPv4-compatible automatic tunnel configuration.

                    Media Access Control Security (MACsec)

                    The switch supports hardware-level encryption technology MACsec (802.1AE), which is an industry-standard security technology that provides secure communication for all traffic on Ethernet links. Compared with traditional application based software encryption technology, MACsec provides point-to-point security on Ethernet links between directly connected nodes and is capable of identifying and preventing most security threats.

                    Hardware Specifications

                    Features

                    S10506X

                    S10508X

                    S10510X

                    Switching capacity

                    60Tbps

                    80Tbps

                    100Tbps

                    Forwarding capacity

                    18000Mpps

                    24000Mpps

                    30000Mpps

                    MPU slots

                    2

                    MPU Name

                    LSUM1MPUS06XEC0

                    LSUM1SUPXD0

                    LSUM1MPUS10XE0

                    MPU Processor

                    1.8GHz 4 cores

                    1.2GHz 4 cores

                    1.8GHz 4 cores

                    MPU Flash /SDRAM

                    Flash 2GB

                    SDRAM 8GB

                    Flash 2GB

                    SDRAM 8GB

                    Flash 2GB

                    SDRAM 8GB

                    MPU Console Ports

                    1x RJ-45

                    1x USB console

                    1x RJ-45

                    1x USB console

                    1x RJ-45

                    1x USB console

                    MPU MGMT Ports

                    2x 10/100/1000M RJ-45

                    2x 1000M SFP

                    2x 10/100/1000M RJ-45

                    2x 1000M SFP

                    2x 10/100/1000M RJ-45

                    2x 1000M SFP

                    MPU USB Port

                    1

                    1

                    1

                    LPU slots

                    6

                    8

                    10

                    Switching fabric module slots

                    5(2 integrated in MPU)

                    5

                    5(2 integrated in MPU)

                    Hardware architecture

                    Orthogonal CLOS

                    Redundancy

                    Redundant MPUs, switching fabric modules, power modules, and fan trays

                    Operating environment

                    Temperature: 0℃ to 45℃ (32°F to 113°F)

                    Humidity: 5% to 95% (non-condensing)

                    Input voltage

                    AC:100V~240V

                    DC:-48V~-60V

                    Maximum power consumption

                    4580W

                    6270W

                    7670W

                    Dimension (H x W x D)/mm

                    397×440×660

                    9RU

                    620×440×660

                    14RU

                    664×440×660

                    15RU

                    Fully loaded weight

                    < 85 kg

                    < 187.4 lb

                    < 120 kg

                    < 264.6 lb

                    < 130 kg

                    < 286.6 lb

                    Software Specifications

                    Ethernet

                    IEEE 802.1Q

                    DLDP

                    LLDP

                    Static MAC configuration

                    Limited MAC learning

                    Port mirroring and traffic mirroring

                    Port aggregation, port isolation, and port mirroring

                    802.1d(STP)/802.1w(RSTP)/802.1s(MSTP)

                    IEEE 802.3ad (dynamic link aggregation), static port aggregation, and multi-chassis link aggregation

                    IEEE 802.1P (CoS priority)

                    IEEE 802.1ad (QinQ), selective QinQ and Vlan mapping

                    GVRP

                    RRPP (Rapid Ring Protection Protocol)

                    Jumbo frame

                    SuperVLAN

                    PVLAN

                    Multicast VLAN+

                    Broadcast/multicast/unknown unicast storm constrain

                    Port based, Protocol based, Subnet-based and MAC based VLAN

                    Routing

                    Static routing, RIP, OSPF, IS-IS, and BGP4

                    IPv4/IPv6 ECMP

                    VRRP

                    IPv4/IPv6 Policy-based routing

                    IPv4/IPv6 Routing policy

                    IPv4/IPv6 dual stack

                    IPv6 static routing, RIPng, OSPFv3, IS-ISv6, and BGP4+

                    VRRPv3

                    Pingv6, Telnetv6, FTPv6, TFTPv6, DNSv6, ICMPv6

                    IPv4-to-IPv6 transition technologies, such as IPv6 manual tunnel, 6to4 tunnel, ISATAP tunnel, GRE tunnel、IPv4-compatible IPv6 tunnel

                    Multicast

                    PIM-DM, PIM-SM, PIM-SSM, MSDP, MBGP, and Any-RP

                    IGMP V1/V2/V3、IGMP V1/V2/V3 Snooping

                    IGMP Filter and IGMP Fast leave

                    PIM6-DM、PIM6-SM、PIM6-SSM

                    MLD V1/V2、MLD V1/V2 Snooping

                    Multicast policy and Multicast QoS

                    ACL/QoS

                    Standard and extended ACLs

                    Ingress and Egress ACL

                    VLAN ACL

                    Global ACL

                    Ingress/Egress CAR with 8K granularity

                    Diff-Serv QoS

                    802.1P/DSCP Priority marking and remarking

                    802.1p, TOS, DSCP, and EXP priority mapping

                    Flexible queue scheduling algorithms including SP, WRR, SP+WRR, CBWFQ

                    Traffic shaping

                    Congestion avoidance, Tail-Drop and WRED

                    SDN/

                    OPENFLOW

                    OpenFlow 1.3

                    Multiple controllers (EQUAL, master/slave)

                    Multiple tables flow

                    Group table

                    Meter

                    VXLAN

                    VXLAN L2 switching

                    VXLAN L3 routing

                    VXLAN VTEP

                    IS-IS+ENDP distributed control plane

                    MP-BGP+EVPN distributed control plane

                    OpenFlow+Netconf centralized control plane

                    Programmability and automation

                    Ansible

                    Auto DevOps by using Python, NETCONF, TCL, and Restful APIs for automated network programming

                    MPLS/VPLS

                    L3 MPLS VPN

                    L2 VPN: VLL (Martini, Kompella)

                    MCE

                    MPLS OAM

                    VPLS, VLL

                    Hierarchy VPLS, QinQ+VPLS

                    P/PE function

                    LDP

                    Security

                    Hierarchical user management and password protection

                    EAD

                    Portal authentication

                    MAC authentication

                    IEEE 802.1x and IEEE 802.1x SERVER

                    AAA/Radius

                    HWTACACS

                    SSHv1.5/SSHv2

                    Basic and advanced ACLs for packet filtering

                    OSPF, RIPv2, BGPv4 plain text and MD5 authentication

                    IP address, VLAN ID, MAC address multiple binding combination

                    uRPF

                    Active/standby data backup

                    System management

                    Loading and upgrading through XModem/FTP/TFTP

                    SNMP v1/v2/v3

                    sFlow,

                    RMON and groups 1,2,3 and 9

                    NTP clocks

                    Fault alarm and automatic fault recovery

                    System logs

                    Device status monitoring mechanism, including the CPU engine, backplane, chips and other key components

                    HA

                    Independent switching fabric modules

                    1+1 redundancy for key components such as MPUS and M+N redundancy for power modules

                    N+1 redundancy for switching fabric modules

                    Passive backplane

                    Hot swapping for all components

                    Real-time data backup on active/standby MPUs

                    CPU protection

                    VRRP

                    Hot patching

                    NSR/GR for OSPF/BGP/IS-IS/RSVP

                    Port aggregation and multi-card link aggregation

                    BFD for VRRP/BGP/IS-IS/OSPF/RSVP/static routing, with a failover detection time less than 50 milliseconds

                    Ethernet QAM (802.1ag and 802.3ah)

                    RRPP/ERPS

                    VCT

                    Smart-Link

                    ISSU

                    Segment Routing

                    O&M

                    Telemetry

                    IEEE 1588V2

                    Green

                    IEEE (802.3az)

                    EMC

                    FCC Part 15 Subpart B CLASS A

                    ICES-003 CLASS A

                    VCCI CLASS A

                    CISPR 32 CLASS A

                    EN 55032 CLASS A

                    AS/NZS CISPR32 CLASS A

                    CISPR 24

                    EN 55024

                    EN 61000-3-2

                    EN 61000-3-3

                    ETSI EN 300 386

                    Safety

                    UL 60950-1

                    CAN/CSA C22.2 No 60950-1

                    IEC 60950-1

                    EN 60950-1

                    AS/NZS 60950-1

                    FDA 21 CFR Subchapter J

                    GB 4943.1

                    Product ID

                    Product Description

                    LS-10508X

                    H3C S10508X Ethernet Switch Chassis

                    LS-10506X

                    H3C S10506X Ethernet Switch Chassis

                    LS-10510X

                    H3C S10510X Ethernet Switch Chassis

                    LSUM1FAB08XE0

                    H3C S10508X&S10508X-V Fabric Module,Type E

                    LSUM1FAB06XEC0

                    H3C S10506X Fabric Module,Type EC

                    LSUM1FAB10XE0

                    H3C S10510X Fabric Module,Type E

                    LSUM1SUPXD0

                    H3C S10500X Supervisor Engine Unit,Type D

                    LSUM1MPUS06XEC0

                    H3C S10506X Main Processing Unit with Switching,Type EC

                    LSUM1MPUS10XE0

                    H3C S10510X Main Processing Unit with Switching,Type E

                    LSUM1AC2500

                    AC Power Supply Module,2500W

                    LSUM1DC2400

                    DC Power Supply Module,2400W

                    LSUM1CGS20XSH0

                    H3C S10500X 20-Port 100G Ethernet Optical Interface Module(QSFP28)(SH)

                    LSUM1TGS48SH0

                    H3C S10500 48-Port 10G Ethernet Optical Interface Module(SFP+,LC)(SH)

                    LSUM1CGS8SH0

                    H3C S10500 8-Port 100G Ethernet Optical Interface Module(QSFP28)(SH)

                    LSUM1CGS8QSSH0

                    H3C S10500 8-Port 100G Ethernet Optical Interface(QSFP28) +8-Port 40G/4-Port 100G Ethernet Optical Interface Module(QSFP28)(SH)

                    LSUM1YGS24CSSH0

                    H3C S10500 24-Port 25G Ethernet Optical Interface(SFP28,LC)+4-Port 100G Ethernet Optical Interface Module(QSFP28)(SH)

                    LSUM2GT24PTSSE0

                    24-Port 10/100/1000BASE-T Interface(RJ45)+20-Port GE Optical Interface(SFP,LC)+4-Port 10GE Optical Interface Module(SFP+,LC)

                    LSUM2TGS32QSSG0

                    H3C S10500,32-Port 10Gb Ethernet Optical Interface(SFP+,LC)+4-Port 40Gb Ethernet Optical Interface Module(QSFP+)(SG)

                    LSUM2QGS12SG0

                    H3C S10500,12-Port 40GBASE Ethernet Optical Interface Module(QSFP+)(SG)

                    LSUM2QGS24RSG0

                    H3C S10500 24-Port 40G Ethernet Optical Interface Module(QSFP+)(SG)

                    LSUM2CQGS12SG0

                    H3C S10500 12-Port 40G/4-Port 100G Ethernet Optical Interface Module(QSFP28)(SG)

                    LSUM1GP48FD0

                    H3C S10500 48-Port 1000BASE Ethernet Optical Interface Module(SFP,LC)(FD)

                    LSUM1GT48FD0

                    H3C S10500 48-Port 1000BASE-T Ethernet Copper Interface Module(RJ45)(FD)

                    LSUM1GP40TS8FD0

                    H3C S10500 40-Port 1000BASE Ethernet Optical Interface (SFP,LC)+8-Port 10G Ethernet Optical Interface Module(SFP+,LC)(FD)

                    LSUM1TGS24FD0

                    H3C S10500 24-Port 10G Ethernet Optical Interface Module(SFP+,LC)(FD)

                    LSUM1TGS16FD0

                    H3C S10500 16-Port 10G Ethernet Optical Interface Module(SFP+,LC)(FD)

                    LSUM1CGS2FE0

                    H3C S10500 2-Port 100G Ethernet Optical Interface Module(QSFP28)(FE)

                    LSUM1TGT24FD0

                    H3C S10500 24-Port 10GBASE-T Ethernet Copper Interface Module(RJ45)(FD)

                    Are you an H3C partner? Log in to see additional resources.
                    You can find excellent H3C partners, or you can become one of them to build a
                    partnership with H3C and share success together.

                                      时时快3